Tattoo Machine Rotaty Battery Pen With Portable Power Pack LCD Digital Display For Body Art Makeup

PACKING LIST

– Wireless tattoo pen machine
– RCA adaptor
– USB-C charger cable
– Tool kit
– Storage bag
– Battery pack: 1 piece or 2 pieces (your option)

Motor: customized brushless motor

Working voltage: 4.5V-12V

Stroke length: 4mm

Charging port: USB-C

Battery capacity: 2400MAH

Charging time: fast charging, fully charged in 1.5-2 hours without electricity;

Use time: Under the normal 8V voltage, it can keep working in a stable voltage state for about 6 hours, and it can be used intermittently for about 7 hours;

LCD display content: output voltage gear + battery usage;

Starting voltage: 4.5V

Recommended Working voltage: 8-10V

Instructions:

The device is a tattoo pen with a built-in lithium battery, which can be used directly without foot pedals and hooks. It consists of two parts: 1. The upper half of the lithium battery power supply 2. The lower half of the tattoo pen; the middle part can be unscrewed to replace the upper half of the lithium battery , the specific functions are as follows:

1. Power on: Press and hold the middle O key for 5 seconds to power on, and then press and hold for 5 seconds to power off;

2. Pause: during normal work, short press the O key to suspend work, and press it again to resume work;

3. Adjust the voltage: press the + or – key to adjust the gear, the corresponding gears 1-8 represent 5-12V respectively;

4. Battery display: It is displayed on the LCD screen, it is full of 4 grids of electricity, and it needs to be charged when there is 1 grid left;

5. Daily charging: external charging port, use the matching USB data cable to charge;

6. Lithium battery warranty: The warranty is one year, and the upper half of the lithium battery can be purchased separately for replacement;

Power parameters:

1. Input: The charging port supplies power to the power supply through the USB data cable. The built-in battery is 3 pieces, 600mA/piece, 3.7V battery, and the output current is fixed at 1A;

2. Output: Power the device through the lithium battery switch key, voltage gear: (1-8 gears correspond to 5-12V) Press the + or – key to switch the voltage gear, 5V is the lowest voltage, and the 1st gear corresponds to 5V , 2nd gear corresponds to 6V, and so on, 8th gear corresponds to 12V;

3. Power storage: fast charge through the matching fast charge USB data cable, normally it can be fully charged in 1.5-2 hours, fully charged with 4 grids of electricity, and it can be used normally for about 6-7 hours when it works at 8V, and the voltage is stable. The last remaining battery needs to be charged to ensure the use time;